Product Finder
Find the Right Products for your Application
Search and filter your results by any of the product parameters below. Can’t find your product? Contact Us.
POLYLAC® from CHI MEI CORPORATION
The POLYLAC® ABS resin of Chi Mei is the most diversified copolymer of acrylonitrile, butadiene, and styrene in the market. This ABS resin provides an ideal balance between rigidity, impact strength, surface finish and hardness, colorability and processibility.
Show these fields:
| Compare | Request Sample | Grade | Resin Type | Specific Gravityg/cm³ | Notched Izod Impactft·lb/in² | Melt Mass Flow Rateg/10 min | Specification | Tensile Strengthpsi | Flexural Moduluspsi | DTUL 66°F | DTUL 264°F | Flame Rating | Processing Method | Volume Resistivityohm·cm |
| PA-717C | Acrylonitrile Butadiene Styrene (ABS) |
1.04 (ASTM D792) |
5.3 (73°F, 0.118 in) |
1.3 (200°C/5.0 kg, ASTM D1238) |
GMP.ABS.001 | 6120 (ASTM D638) |
356000 (ASTM D790) |
203 (Annealed, ASTM D648) |
HB (0.0630 in) |
Injection Molding | ||||
| PA-727 | Acrylonitrile Butadiene Styrene (ABS) |
1.04 (ASTM D792) |
4.8 (73°F, 0.118 in) |
1.6 (200°C/5.0 kg, ASTM D1238) |
GMP.ABS.007 | 6900 (ASTM D638) |
384000 (ASTM D790) |
203 (Annealed, ASTM D648) |
HB (0.0630 in) |
Injection Molding | ||||
| PA-747R | Acrylonitrile Butadiene Styrene (ABS) |
1.04 (ASTM D792) |
8.3 (73°F, 0.118 in) |
0.25 (200°C/5.0 kg, ASTM D1238) |
GMP.ABS.006 | 6120 (ASTM D638) |
327000 (ASTM D790) |
203 (Annealed, ASTM D648) |
HB (0.0630 in) |
Extrusion | ||||
| PA-777D | Acrylonitrile Butadiene Styrene (ABS) |
1.06 (ASTM D792) |
3.1 (73°F, 0.118 in) |
5.5 (220°C/10.0 kg, ASTM D1238) |
GMW15572P-ABS-T2 | 6190 (ASTM D638) |
327000 (ASTM D790) |
239 (Annealed, ASTM D648) |
HB (0.0630 in) |
Injection Molding | ||||
| PA-777B | Acrylonitrile Butadiene Styrene (ABS) |
1.03 (ASTM D792) |
4.2 (73°F, 0.118 in) |
7.5 (220°C/10.0 kg, ASTM D1238) |
GMW15572P-ABS-T2 | 6190 (ASTM D638) |
313000 (ASTM D790) |
225 (Annealed, ASTM D648) |
HB (0.0630 in) |
Injection Molding |
