Product Finder
Find the Right Products for your Application
Search and filter your results by any of the product parameters below. Can’t find your product? Contact Us.
Grivory® from EMS-GRIVORY
This group of engineering plastics is based on semicrystalline polyamides with partially aromatic content.
Show these fields:
| Compare | Request Sample | Grade | Resin Type | Specific Gravityg/cm³ | Notched Izod Impactft·lb/in² | Melt Mass Flow Rateg/10 min | Specification | Tensile Strengthpsi | Flexural Moduluspsi | DTUL 66°F | DTUL 264°F | Flame Rating | Processing Method | Volume Resistivityohm·cm |
| GV-4H | Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) |
1.47 (ISO 1183) |
GM7001M PA BA650 K1750 MB750 R75 S1200 | 33400 (at Break, ISO 527-1, -2) |
455 (Unannealed, ISO 75A-1, -2) |
Extrusion Injection Molding |
1.0E+14 (IEC 60093) |
|||||||
| GV-2H | Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) |
1.28 (ISO 1183) |
GM7001M PA BA620 K700 MB450 R25 S1180 | 21000 (at Break, ISO 527-1, -2) |
446 (Unannealed, ISO 75A-1, -2) |
Extrusion Injection Molding |
1.0E+14 (IEC 60093) |
|||||||
| GV-6H | Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) |
1.69 (ISO 1183) |
GMW15702 | 37700 (at Break, ISO 527-1, -2) |
455 (Unannealed, ISO 75A-1, -2) |
Extrusion Injection Molding |
1.0E+14 (IEC 60093) |
|||||||
| GV-5H | Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) |
1.56 (ISO 1183) |
GMP.PA66.090 | 36300 (at Break, ISO 527-1, -2) |
455 (Unannealed, ISO 75A-1, -2) |
Extrusion Injection Molding |
1.0E+14 (IEC 60093) |
|||||||
| HTV-3H1 nat | Polyamide 6I/6T Copolymer (Nylon 6I/6T) |
1.44 (ISO 1183) |
GMP.PPA.004 | 27600 (at Break, ISO 527-1, -2) |
536 (Unannealed, ISO 75A-1, -2) |
Injection Molding | 1.0E+13 (IEC 60093) |
